Grandstream HT701 & HT802 ATA Adapters
Compatibility
Grandstream HT701
- A FXS Port for one analog fax device.
Grandstream HT802
- Two FXS Ports for two analog endpoints
| Provisioning | Firmware Management |
|---|---|
| Yes | No |
Provisioning: The gateway / adapter will be managed via the pascom phone system.
Firmware Management: Device firmware can not be actualized / updated via the pascom phone system.
Configuration
Prepartion
For automatic device commissioning, a functioning DHCP server is essential. Please refer to Network planning & configuration for more information.
Device Commissioning
Connect your Grandstream ATA to your network. The device will then automatically appear in the Gateways list once successfully booted Gateways > Gateway list.
Adding Endpoints via SIP
Follow the following steps Devices > Device list > Add > and select the option Via Grandstream Gateway: Analog device via SIP.
Next, under the Basic data tab select the Gateway port on which the device should be connected to. Finally, assign the device to a user under the Assignment tab.
After saving your configuration, the Gateway must be manually restarted. This needs to only be done once and is done by disconnecting the Gateway’s power supply. After restarting, the Grandstream ATA will be provisioned by the pascom phone system.