Snom M700 base stations can be operated in both Single Cell and Multi-Cell deployments and are compatible with pascom cloud, hardware and virtual phone systems. As such the Snom M700 is ideally suited for organisations that require additional work place mobility over multiple floors or across larger company buildings.
For the automatic commissioning of Snom DECT systems, a functioning DHCP server is required. For more information, please refer to DHCP Server Configuration.
Connect all required Snom base stations to your network. Once the boot process is completed, base stations will automatically appear in the PBX web UI Gateway list (‘Gateways’ > ‘Gateway list’):
The Status field currently has no relevance and the “plug symbol” warning is normal at this stage.
Should you wish to network multiple Gateways into a multicell DECT system, simply mark and select all the desired Gateways and click Edit. By using the arrow buttons, you can navigate through all your selected Gateways and then edit them as follows.
Mutli Cell option, select the value
Base Station for one of the Gateways and for all other Gateways, select the option
Device List >
Add, select the option
Via snom DECT Gateway: handset
Ìn the next screen, you will be able to configure the device and under the
Assignment tab you will be able to assign users and / or locations.
|Connected to||Select a Gateway to connect to.||In multicell environments, all Gateways configured as a repeater are automatically hidden.|
|IPEI Number||Enter the handset IPEI number which can be found via the handset menu Settings > Status||The first line of the IPEI number is enough, i.e. everything after the colon (:) symbol does not need to be entered.|
|SIP Options||(Optional Step) It is possible to enter all the SIP peer options as supported by Asterisk||Please refer to Asterisk’s SIP Configuration - Peers and Clients Documentation.|