Hallo,
ich habe das Problem, dass bei einer eingehenden Verbindung die falsche Rufnummer angezeigt wird.
Ich rufe dabei von einem externen Anschluss mit der Nummer +49369XXXXXXXX die Nummer +489576XXXXX an. Der Anruf kommt auch durch und die richtige Nebenstelle klingelt. Allerdings glaub die Pascom-ANlage wohl, dass es die Nummer ergänzen muss und macht daraus: 00489549369XXXXXXXX
Es werden also die Landes- und lokale Ortsvorwahl vorangestellt. Was muss ich konfigurieren, damit die eingehende Rufnummer korrekt erkannt wird?
Hier das log:
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Executing [489576XXXXX@mdc_incoming-8:1] Set(“SIP/mdc_trunk_conf-8-00000028”, “MDC_CALLER_NUM_TRUNK=49369XXXXXXXX”) in new stack
– Executing [489576XXXXX@mdc_incoming-8:2] Gosub(“SIP/mdc_trunk_conf-8-00000028”, “sub_deterdest,s,1(TMP_TO_HEADER, sip:489576XXXXX@91.137.X.XXX:5060)”) in new stack
– Executing [s@sub_deterdest:1] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,sub_deterdest:: variable: TMP_TO_HEADER header: sip:489576XXXXX@91.137.X.XXX:5060”) in new stack
sub_deterdest:: variable: TMP_TO_HEADER header: sip:489576XXXXX@91.137.X.XXX:5060
– Executing [s@sub_deterdest:2] Set(“SIP/mdc_trunk_conf-8-00000028”, “TMP_DN=489576XXXXX@91.137.X.XXX”) in new stack
– Executing [s@sub_deterdest:3] Set(“SIP/mdc_trunk_conf-8-00000028”, “TMP_DN=489576XXXXX”) in new stack
– Executing [s@sub_deterdest:4] Set(“SIP/mdc_trunk_conf-8-00000028”, “TMP_TO_HEADER=489576XXXXX”) in new stack
– Executing [s@sub_deterdest:5] Return(“SIP/mdc_trunk_conf-8-00000028”, “”) in new stack
– Executing [489576XXXXX@mdc_incoming-8:3] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,to-header 489576XXXXX is extracted”) in new stack
to-header 489576XXXXX is extracted
– Executing [489576XXXXX@mdc_incoming-8:4] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,request-uri 489576XXXXX is given”) in new stack
request-uri 489576XXXXX is given
– Executing [489576XXXXX@mdc_incoming-8:5] Gosub(“SIP/mdc_trunk_conf-8-00000028”, “sub_comparedest,s,1(MDC_CALLEE_NUM_TRUNK,489576XXXXX,489576XXXXX)”) in new stack
– Executing [s@sub_comparedest:1] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,sub_comparedest:: variable: MDC_CALLEE_NUM_TRUNK request: 489576XXXXX to: 489576XXXXX”) in new stack
sub_comparedest:: variable: MDC_CALLEE_NUM_TRUNK request: 489576XXXXX to: 489576XXXXX
– Executing [s@sub_comparedest:2] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,compare 489576XXXXX = 489576XXXXX”) in new stack
compare 489576XXXXX = 489576XXXXX
– Executing [s@sub_comparedest:3] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “1?useuri”) in new stack
– Goto (sub_comparedest,s,13)
– Executing [s@sub_comparedest:13] NoOp(“SIP/mdc_trunk_conf-8-00000028”, “using Request-URI”) in new stack
– Executing [s@sub_comparedest:14] Set(“SIP/mdc_trunk_conf-8-00000028”, “MDC_CALLEE_NUM_TRUNK=489576XXXXX”) in new stack
– Executing [s@sub_comparedest:15] Return(“SIP/mdc_trunk_conf-8-00000028”, “”) in new stack
– Executing [489576XXXXX@mdc_incoming-8:6] Goto(“SIP/mdc_trunk_conf-8-00000028”, “mdc_trunk-6,s,1”) in new stack
– Goto (mdc_trunk-6,s,1)
– Executing [s@mdc_trunk-6:1] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,callee number: 489576XXXXX caller number: 49369XXXXXXXX”) in new stack
callee number: 489576XXXXX caller number: 49369XXXXXXXX
– Executing [s@mdc_trunk-6:2] Ringing(“SIP/mdc_trunk_conf-8-00000028”, “”) in new stack
– Executing [s@mdc_trunk-6:3] Progress(“SIP/mdc_trunk_conf-8-00000028”, “”) in new stack
– Executing [s@mdc_trunk-6:4] Gosub(“SIP/mdc_trunk_conf-8-00000028”, “sub_nat2int,s,1(MDC_CALLER_NUM_INTERNAT,49369XXXXXXXX,00,48,0,95,1)”) in new stack
– Executing [s@sub_nat2int:1] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,sub_nat2int:: variable: MDC_CALLER_NUM_INTERNAT - number: 49369XXXXXXXX - intVAZ: 00 - lkz: 48 - natVAZ: 0 - onKz: 95 - incoming: 1”) in new stack
sub_nat2int:: variable: MDC_CALLER_NUM_INTERNAT - number: 49369XXXXXXXX - intVAZ: 00 - lkz: 48 - natVAZ: 0 - onKz: 95 - incoming: 1
– Executing [s@sub_nat2int:2] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “0?s-emergency,1”) in new stack
– Executing [s@sub_nat2int:3] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “0?s-int,1”) in new stack
– Executing [s@sub_nat2int:4] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “0?s-int,1”) in new stack
– Executing [s@sub_nat2int:5] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “0?s-convert,1”) in new stack
– Executing [s@sub_nat2int:6] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “0?s-int,1”) in new stack
– Executing [s@sub_nat2int:7] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “0?s-intshort,1”) in new stack
– Executing [s@sub_nat2int:8] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “0?s-natshort,1”) in new stack
– Executing [s@sub_nat2int:9] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “0?s-nat,1”) in new stack
– Executing [s@sub_nat2int:10] Goto(“SIP/mdc_trunk_conf-8-00000028”, “s-local,1”) in new stack
– Goto (sub_nat2int,s-local,1)
– Executing [s-local@sub_nat2int:1] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,local”) in new stack
local
– Executing [s-local@sub_nat2int:2] Set(“SIP/mdc_trunk_conf-8-00000028”, “MDC_CALLER_NUM_INTERNAT=00489549369XXXXXXXX”) in new stack
– Executing [s-local@sub_nat2int:3] Return(“SIP/mdc_trunk_conf-8-00000028”, “”) in new stack
– Executing [s@mdc_trunk-6:5] Set(“SIP/mdc_trunk_conf-8-00000028”, “CALLERID(num)=00489549369XXXXXXXX”) in new stack
– Executing [s@mdc_trunk-6:6] Gosub(“SIP/mdc_trunk_conf-8-00000028”, “sub_int2nat,s,1(MDC_CALLER_NUM_NAT,00489549369XXXXXXXX,00,48,0,95,1)”) in new stack
– Executing [s@sub_int2nat:1] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,sub_int2nat:: variable: MDC_CALLER_NUM_NAT - exten: 00489549369XXXXXXXX - intVAZ: 00 - lkz: 48 - natVAZ: 0 - onKz: 95 - incoming: 1”) in new stack
sub_int2nat:: variable: MDC_CALLER_NUM_NAT - exten: 00489549369XXXXXXXX - intVAZ: 00 - lkz: 48 - natVAZ: 0 - onKz: 95 - incoming: 1
– Executing [s@sub_int2nat:2] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “0?s-emergency,1”) in new stack
– Executing [s@sub_int2nat:3] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “0?nat”) in new stack
– Executing [s@sub_int2nat:4] GotoIf(“SIP/mdc_trunk_conf-8-00000028”, “1?s-internat,1”) in new stack
– Goto (sub_int2nat,s-internat,1)
– Executing [s-internat@sub_int2nat:1] Set(“SIP/mdc_trunk_conf-8-00000028”, “MDC_CALLER_NUM_NAT=09549369XXXXXXXX”) in new stack
– Executing [s-internat@sub_int2nat:2] Return(“SIP/mdc_trunk_conf-8-00000028”, “”) in new stack
– Executing [s@mdc_trunk-6:7] Set(“SIP/mdc_trunk_conf-8-00000028”, “CALLERID(num)=09549369XXXXXXXX”) in new stack
– Executing [s@mdc_trunk-6:8] UserEvent(“SIP/mdc_trunk_conf-8-00000028”, “ResolveCallerName,Strategy: system,Outbound: 0”) in new stack
– Executing [s@mdc_trunk-6:9] Wait(“SIP/mdc_trunk_conf-8-00000028”, “0.25”) in new stack
– Executing [s@mdc_trunk-6:10] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,MDC_RESOLVENAME_HITS = 0”) in new stack
MDC_RESOLVENAME_HITS = 0
– Executing [s@mdc_trunk-6:11] Verbose(“SIP/mdc_trunk_conf-8-00000028”, "1,CALLERID(name) = ") in new stack
CALLERID(name) =
– Executing [s@mdc_trunk-6:12] Set(“SIP/mdc_trunk_conf-8-00000028”, “MDC_NUMPREFIX_TRUNK=”) in new stack
– Executing [s@mdc_trunk-6:13] Goto(“SIP/mdc_trunk_conf-8-00000028”, “mdc_mapping-6,489576XXXXX,1”) in new stack
– Goto (mdc_mapping-6,489576XXXXX,1)
– Executing [489576XXXXX@mdc_mapping-6:1] Set(“SIP/mdc_trunk_conf-8-00000028”, “CHANNEL(language)=de”) in new stack
– Executing [489576XXXXX@mdc_mapping-6:2] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,mapping from _48957665XXX to 901”) in new stack
mapping from _48957665XXX to 901
– Executing [489576XXXXX@mdc_mapping-6:3] Goto(“SIP/mdc_trunk_conf-8-00000028”, “mdc_external,901,1”) in new stack
– Goto (mdc_external,901,1)
– Executing [901@mdc_external:1] SIPAddHeader(“SIP/mdc_trunk_conf-8-00000028”, "“Alert-Info:http://www.notused.de;info=alert-external;x-line-id=0"”) in new stack
– Executing [901@mdc_external:2] GosubIf(“SIP/mdc_trunk_conf-8-00000028”, “1?sub_initcall,s,1(ext,901)”) in new stack
– Executing [s@sub_initcall:1] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,sub_initcall descent: ext exten: 901”) in new stack
sub_initcall descent: ext exten: 901
– Executing [s@sub_initcall:2] GosubIf(“SIP/mdc_trunk_conf-8-00000028”, “1?sub_initloop,s,1”) in new stack
– Executing [s@sub_initloop:1] Verbose(“SIP/mdc_trunk_conf-8-00000028”, “1,initial loop”) in new stack
initial loop
– Executing [s@sub_initloop:2] Set(“SIP/mdc_trunk_conf-8-00000028”, “MDC_ALIAS_HOP=0”) in new stack
– Executing [s@sub_initloop:3] Set(“SIP/mdc_trunk_conf-8-00000028”, “MDC_MAIN_HOP=0”) in new stack
– Executing [s@sub_initloop:4] Return(“SIP/mdc_trunk_conf-8-00000028”, “”) in new stack
– Executing [s@sub_initcall:3] Set(“SIP/mdc_trunk_conf-8-00000028”, “__MDC_TRANSFERBACK_HOP=0”) in new stack
Vielen Dank und Gruß
Stephan