Overview of the pascom managed Provider Template from peoplefone
Tariff in combination with pascom: All offered Tariffs
Information about features and tariff informations can be found here: peoplefone.
1. Your Account
To set up a SIP Trunk via a pascom Provider Template, you need the SIP Account data from your provider.
You will receive the account data for your SIP trunk account from your provider by mail or can be viewed online in a customer portal.
Using a Peoplefone Test Trunk
When setting up a new pascom telephone system, you can set up a free test SIP trunk of peoplefone during the setup. This test account is automatically set up on the pascom telephone system and can be used immediately.
Test Credit: 10,-€ Test Number: will be created dynamicly Test account can be easily upgraded in the Peoplefone customer portal
Select the Button Create Test Account in the setup menu.
Then fill in the predefined fields with your person/company data and accept the terms and conditions of Peoplefone. Congratulations! The Peoplefon Test Trunk has been created and can be used on the pascom telephone system.
Write down the data of the Peoplefon Test Trunk!
Completing the Trunk Template
Add a new SIP trunk under > > , which directs you the the SIP provider database. Using the filter, you can search directly for Peoplefone templates. Select the Peoplefone template and add your account data / credentials to the template setup wizard.
Fill in the Variables
|Name||Enter a name for the trunk, which will be displayed in the Trunks overview.|
|Telephony username||Use the telephony username from your registration data.|
|Telephony password||Enter the corresponding password.|
|Number of registration||Registration phone number (Registrierungsrufnummer) as found in the registration data.|
|Area code||Enter your area code (Ortskennzahl / Ortsvorwahl) excluding the leading 0, e.g. 991.|
|Originating number||Telephony connection base / line number (Stammnummer) excluding extension number block e.g. the number displayed as XXXXXX in our example.|
|Prefix for incoming number||Any digit which should precede all incoming calls via this trunk. For example entering 0 will mean that all inbound call numbers will be displayed in the call logs on IP Phones as 00172123123 instead of 0172123123. This enables the direct call back from the call history via this trunk.|
|Number of extension digits||The digit length of User Extensions - NOT the number of digits in the number block|
|Extension for central||Enter the internal extension number to which calls to the first number of your number block (normally 0) should be routed, i.e. to the switchboard / reception / AutoAttendant.|
After pressing the trunk will be added.
3. Does your Trunk work?
To make sure that your data has been entered correctly and that the pascom PBX has successfully registered with your provider, click on the - on the at your trunk. Here you can see if the registration has worked. (registered).
4. Define your Call rules
The trunnk is established and successfully registered. As a final step, you define your incoming and outgoing call rules to set the call behavior of your pascom telephone system.
We explain how to set up call rules in the Call Rules Tutorial